steel support
Steel support is a formwork support system designed specifically for heavy-duty construction projects, mainly used in scenarios such as high-rise buildings, bridge construction, and large-span structures that require high load support. This product adopts...
Steel support is a formwork support system designed specifically for heavy-duty construction projects, mainly used in scenarios such as high-rise buildings, bridge construction, and large-span structures that require high load support. This product adopts thickened wall pipes and innovative service adjustment nuts, with a bearing capacity of over 50kN. Compared with ordinary adjustable steel supports, it has stronger stability and can meet higher strength construction requirements
2. Product Structure and Materials
Thickened Pipe Material: Inner pipe wall thickness is 3.5mm-4.5mm, outer pipe wall thickness is 4.0mm-5.0mm, using Q345B high-strength steel to improve load-bearing capacity.
High strength adjusting nut: Made of forged steel with good compressive strength, confirmed to be able to adjust height smoothly under heavy loads Bottom and top plates: 8mm thick steel plates are used, and reinforced structures are added to improve bending resistance Surface protection: hot-dip galvanizing or electrostatic spraying to enhance corrosion resistance (based on actual reports) and improve service lifeIII. Product Advantages
Good performance, bearing capacity: up to 50kN, suitable for high load construction scenarios.
Enhanced anti deformation performance: Designed with thickened steel pipes and reinforced ribs, it is not easily deformed even under long-term stress Wide adjustable height range: supports free adjustment of 2.0m-5.5m to meet different floor height requirements High installation stability: The base is enlarged and thickened, providing strong anti overturning ability and confirming safe constructionScope of Application
High rise building construction: Suitable for formwork support systems in high-rise buildings, confirming the safety and stability of floor pouring.
Bridge engineering: used for temporary support in bridge support frames and pier construction Construction of large-span factory buildings: Provide stable support during the construction of large-span steel or concrete structures Construction of Warehousing and Logistics Centers: Supporting high load warehouse buildings to improve construction safetyFifth, Product Parameters (Customizable)
Height Range: 2.0m-5.5m (Customizable)
Inner Pipe Diameter: 60mm -76mm
Outer Pipe Diameter: 76mm -90mm
Wall Thickness: 3.5mm -5.0mm
Large Bearing Capacity: 50kN-80kN
Surface Treatment: Hot dip Galvanized, Electroplated Galvanized, Spray Coated
Sixth, Usage
Check Accessories: Confirm that all components are intact and nuts can be adjusted freely.
Adjust height: Adjust the height according to construction requirements and lock the adjustment nut Fixed base: Confirm that the base is in close contact with the ground and avoid tilting Add lateral support: In high load usage scenarios, lateral support rods can be used to improve overall stability7. Precautions
It is necessary to use it within the specified load-bearing range, and overloading construction is strictly prohibited.
After adjusting the height, be sure to tighten the nut to prevent the support rod from sliding down When stored for a long time, it is recommended to apply anti rust oil to extend its service life
