steel support

Steel support is a vertical support system used in construction, widely used in formwork support, floor pouring, bridge construction and other scenarios. It consists of main components such as inner tube, outer tube, adjusting nut, bottom plate, and top plate. By adjusting the nut, height adjustment can be achieved to meet different construction needs. It has the characteristics of strong bearing capacity, flexible adjustment, and convenient installation

2. Product Structure and Materials

Inner and Outer Pipes: High quality Q235 or Q345 carbon steel pipes are used, with a wall thickness generally between 1.8mm-3.5mm, to protect sufficient bearing capacity and practicality.

Adjustment nut: Made of high-strength cast steel or forged steel, confirmed to have stable load-bearing capacity and smooth adjustment without jamming

Bottom and top plates: Generally, steel plates with a thickness of 3mm-5mm are used, and reinforcing ribs can be welded at the bottom according to requirements to improve stability

Surface treatment: Hot dip galvanizing, galvanizing, spray painting or spray painting can be selected to enhance corrosion resistance (based on actual reports) and extend service life

III. Product Advantages

Strong Bearing Capacity: Adjustable steel supports generally have a bearing capacity between 10kN-40kN, which can meet various template support needs.

Height adjustable: The length can be freely adjusted according to construction needs, suitable for building structures of different heights

Faster installation: Compared to traditional wooden or steel pipe fastener support systems, installation and disassembly are more convenient, improving construction efficiency

Good reuse rate: Steel structure, stable and strong performance, can be used multiple times, reducing construction costs

Anran Stability: High strength materials are used and rigorously tested to confirm safe construction

Scope of Application

Construction: Used to support formwork structures such as floor slabs, beams, and columns.

Bridge engineering: As a temporary support system in bridge construction

Tunnel construction: used to support tunnel arches or other structures

Stage and exhibition construction: used as supporting equipment in temporary buildings or stage structures

Fifth, Product Parameters (Customizable)

Height Range: 1.5m-4.0m (Customizable according to needs)

Inner Pipe Diameter: 40mm-60mm

Outer Pipe Diameter: 48mm-76mm

Wall Thickness: 1.8mm-3.5mm

Bearing Capacity: 10kN-40kN

Surface Treatment: Hot dip galvanizing, electro galvanizing, spray painting or spray painting

Sixth, Usage

Pre installation Inspection: Check whether the support rod is intact and whether the nut is flexible and adjustable.

Adjust height: Adjust the adjustable nut according to construction requirements to achieve the appropriate height of the support

Fixed support: Fix the base on the load-bearing surface and ensure stability without tilting

Check the bearing condition: Confirm that the support is evenly stressed, and add lateral reinforcement devices if necessary

7. Precautions: Overloading is strictly prohibited during the construction process to prevent unstable supports from causing safety accidents

After prolonged use, the support should be checked for deformation and replaced promptly if damaged

When storing, avoid humid environments to prevent rusting and affect the service life