scaffold

Component composition

Basic structure: It is a structural part that directly bears and transfers vertical loads and their internal forces, composed of basic structural units such as rectangular plane grids and rectangular solid grids.

Integral tie rods: including diagonal braces, diagonal braces, and horizontal reinforcement rods, can form a stable framework for scaffolding and enhance its ability to resist lateral forces

Homework layer pole accessories: There are scaffold boards, toe boards, railings and other protective materials on the frame surface and outer side, used for operators to operate and protect.

Other Enron protective measures include import and export protection, as well as various Enron fences, safety nets, etc

Wall tie: Using rigid tie structures or a combination of flexible tie structures and rigid support rods, such as steel pipe tie structures, through wall bolt tie structures, etc., to improve the stability and load-bearing capacity of scaffolding and prevent overturning

Installation Requirements

Foundation Treatment: The foundation of the scaffold should be flat and solid, with drainage measures in place. Construction can only begin after the foundation has been accepted as qualified. When installing it on the building structure, a structural bearing capacity review is required.

Material selection: Qualified materials need to be used, and they must be inspected before entering the site, such as steel pipes without deformation or cracks, fasteners without slipping wires, etc

Erection sequence: Generally, the order of erecting poles, then crossbars, then diagonal poles, and then connecting wall components is followed. For example, bowl buckle steel pipe scaffolding should be erected layer by layer in the order of erecting poles, crossbars, diagonal poles, and connecting wall components.

Connection fixation: The connection between the members should be firm and excellent. For example, the fasteners of the clip type steel pipe scaffold should be tightened, and the bowl buckles of the bowl buckle type steel pipe scaffold should be tightened.

Protective Facilities Setting: It is necessary to set up protective facilities such as scaffolding boards, toe boards, railings, and safety nets. The scaffolding boards should be fully, stably, and solidly laid.